Mictel Flat Paint


Mictel flat paints is based on special alkyd resins. It is a superior quality hard wearing with classic old- world feel for most types of interior and exterior surfaces.

It can be used on wood and all types of ferrous and non-ferrous metal: iron, steel, aluminum etc. When applied over the Mictel undercoat, it gives a hard matte film that resist scuffing, fingerprints and staining.


It is very important to remove dirt, grease, oil and rust before painting and ensure that the surface is perfectly clean and dry.

Apply Mictel undercoat first, allow to dry thoroughly, then apply Mictel flat paints as required.

Method of application

Bush, paint-roller or spray gun (air or airless) may be used.

Stir well and thin with white spirit as required before use.

Covering capacity 

16-20 sq. m. / liter, at 30-40 micron wet film thickness, depending on the substrate.


Mictel flat paint is available in the following standard packs:

– 1 US gallons.

– 20 kg pail.


Should be stored in a cool place and not subjected to extremes of heat or placed in direct sunlight.