Mictel Anti Bacterial Paints

Characteristics

Mictel Anti-Bacterial Paints  is a repeatedly washable superior quality anti-carbonation paint, based on special vinyl acrylic copolymer applied on old or new exterior and interior surfaces, also applied on all types of dry walls such as plaster concrete, building boards, brick, wall paper and previously painted surfaces. Sheen is prepared to resist mould, fungal and algal growth.

It is applicable by brush, roller or spray-gun which dries to result a beautiful and attractive rich flat finish.

Pre-Treatment

Mictel Anti-Bacterial Paints is one of the most important conditions to ensure a satisfactory result is that the surface to be painted must be clean, dry and compact without loose material such as efflorescence which must be removed prior to painting. For priming and all coats thin up to 30% with clean, fresh water according to absorption. Some substrates need to dilute up to 50% to achieve normal working consistency.

It dries to touch within 1 hour at 25 degrees centigrade and can be recoated under normal condition in 2-3 hours.

Covering Capacity

13-17 square meters / liter depending on substrates with 30 microns film thickness.

Specific Gravity

Approximately 1.35 depending on shade.

Packaging

Mictel Anti-Bacterial Paints is available in:

1 US gallons

22 Kg/pail

Storage

Must be stored in a cool place, away from freezing; not subject to extreme heat or exposed to direct sunlight.