Brute Paint

Characteristics

It is a thermoplastic anti – carbonation paint, specially designed to act as hydraulic binder with very good flexibility. This brute paint demonstrates excellent rub, water and alkaline resistance, and it is prepared to resist mould, fungal and algal growth.

It is applicable by brush, roller or spray-gun.

Pre-treatment

One of the most important conditions to ensure a satisfactory result is that the surface to be painted is clean, dry and compact without loose material such as efflorescence which must be removed prior to painting.

For priming thin up to 50% with clean, fresh water according to absorption. Remaining coats dilute up to 30% to achieve normal working consistency.

Typical properties

Appearance : Grey color.

Total solid , % by weight : Approximately 65% .

Viscosity at 26c : 5000-10000 cps (brook filed LV

viscometer spindle No. 2.60 rpm).

PH value : 8 9.5

Particle size : Approximately 0.27 microns.

Specific Gravity : Approximately 1.2

MFFT : < 1>

Brute paint dries to touch within 1 hour and can be recoated under normal condition in 2-3 hours, depending on weather condition.

Covering capacity

15-20 square meters / liter depending on substrate.

Technical Characteristics 

– Excellent adhesion to all cement based surface

– Excellent weather and UV resistance

– Excellent thermal resistance: the product hardly returns soft, has a max

service temperature of 60 degrees centigrade.

– Resistance to cold: the film remains elastic even below 0 degrees

centigrade.

– Excellent mechanical properties: high tensile and tear strength, and

abrasion- resistance.

Packaging 

Brute paint is available in the following Packs:

– 1 US gallons.

– 20 liters pails.

Storage

Should be stored in a cool place away from freezing and not subject to extremes of heat or placed in direct sunlight.

Back